Kohler K-16158-BN Guida di Installazione Scaricare il pdf

TOOLS AND MATERIALS REQUIRED:

 Tape measure

 Screwdrivers

 Level (24” or longer)

 Pencil

 1/8” hex wrench

 #12 wood screws (minimum)

ROUGHING-IN:

INSTALLATION:

WARNING: Risk of severe personal injury.

Minimum 1/2” plywood or 2x4 studding is

required to ensure safe mounting support for

this grab bar. Refer to ASTM F446 for additional

information.

1. Determine the required location for the grab bar

installation, and mark the finish wall surface

accordingly.

NOTE: Use care to avoid scratching the product

finish.

2. Slip an escutcheon onto each end of the grab bar.

3. Handtighten a bracket onto each end of the grab bar.

4. Ensure that the grab bar is plumb or level, as

required. Then secure the brackets to the wall with

minimum #12 wood screws. Do not use drywall

screws.

5. Slide the escutcheons flat against the wall, and

secure by tightening the setscrews. Do not

overtighten.

114696-2-BB



REVIVAL GRAB BAR

K-16156

K-16158

2000 Kohler Co.

2-5/8”

3” D.

K-16156=12”

Fig. #1

K-16158=18”

Bracket

Setscrew

Grab Bar

Escutcheon

Fig. #2

Sommario

Pagina 1 - INSTALLATION:

TOOLS AND MATERIALS REQUIRED: Tape measure Screwdrivers Level (24” or longer) Pencil 1/8” hex wrench #12 wood screws (minimum)ROUGHING-IN:INSTAL

Commenti su questo manuale

Nessun commento

Kohler K-16158-BN Guida di Installazione

Navigare online o scaricare Guida di Installazione per no Kohler K-16158-BN. KOHLER K-16158-BN Installation Guide Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Kohler K-16158-BN