Kohler K-5293-7 Guida di Installazione Scaricare il pdf (Pagina 5)

1. Prepare the Recess

NOTE: Be sure to provide adequate backing for the fasteners.

Determine the desired ″A″ dimension, as shown in the

roughing-in. Add 17″ (43.2 cm) to the ″A″ dimension chosen. The

overall inside height dimension produced from this calculation is

needed in the next step.

Prepare a stud framing box at the chosen installation site. The

inside dimensions of the framed box must be 13″ (33 cm) wide by

23″ (58.4 cm) high. The distance between the top inside of the box

and the ﬂoor must be the dimension previously calculated.

Rough-in the supply and drain piping according to the

roughing-in.

Provide adequate backing for the fasteners.

Prepare and drill the stud framing for the cuspidor supply tube.

Route the cuspidor supply tube through the stud framing so that

the ground-joint ﬁtting is on the drinking fountain side.

Position the cuspidor supply tube so that it protrudes evenly

from both ends of the stud framing.

13"

(33 cm)

23"

(58.4 cm)

Cuspidor

Supply Tube

Kohler Co. 5 105126-2-AB

1 2 3 4 5 6 7 8 9 10 ... 39 40

Nessun commento

Kohler K-5293-7 Guida di Installazione Pagina 5